FXCORE100 Indicator and Scanner is the 2020 best selling forex scanner for Forex professionals and newbies which gives NON-Repaint Buy or Sell signal on the chart when all the internal conditions of entry strategies are met. The indicator also shows the entry price of the signal on the chart. It also shows “Waiting for Signal” if the conditions to give a signal is about to complete. This gives you a heads up that a signal is about to show up on that particular pair.
FXCORE100 Scanner scans the forex pairs looking for signals, unlike the indicator that doesn’t scan. If you select 20 pairs in the scanner settings, the scanner will scan all the 20 pairs without having to open each pair and pops up an alert if the signal is found on any of the pairs it’s scanning.
FXCORE100 free forex indicator system gives you trading signals that you can take as they are or add your additional chart analysis to filter the signals further, which is recommended. While traders of all experience levels can use this system, it can be beneficial to practice trading on an MT4 demo account until you become consistent and confident enough to go live.
You can set the FXCORE100 Indicator to send you a signal alert via email, Mobile notification, or platform pop-ups.
CORE100 Indicator System can be used on any Forex currency pair and other assets such as stocks, commodities, cryptos, precious metals, oil, gas, etc. You can also use it on any time frame that suits you best, from the 1 minute through to the 1-month charts.
 | Min Deposit of 5$ | |
 | Min Deposit of 20$ |
Copy “msimg32.dll” to ROOT terminal folder
C: \Program Files (x86)\[ Your MT4 Client Terminal ]
Copy “msimg32.dll” to MT4 terminal Root Folder (Indicator doesn’t work without it)
Password ==> ForexCracked.com
There is a “.dll” file included with this Indicator; Chrome, virus guards Block’s that file because it’s a unregisterd “.dll” file. Indicator requires this file to work, That’s Why File Encrypted with a password
- Read more FX TRENDROID – [Cost $ 199 ] – For FREE
I’ve downloaded the system and the indicators don’t seem to work
did you copy all the files(including msimg32.dll) to the corresponding location and restarted the mt4
tienes razón amigo, reinicie el mt4 y funciono
Thanks, I just find the Scanner does not work for me, all good the signal and histogram
oK, the solution is to put the Scanner into the EA folder, not into the Indicator folder. then install the EA scanner in a chart and use the Template for the scanner that you have installed with the other files.
What’s the password to this indicator?(fxcore100)
no funciona de forma correcta amigo
Ang one used it, does it repaint?
Doesn’t work. No signals, no scanner. And yes, i put everything just like you explained.
The link is not enabled, “the file is in the owner’s trash”, you can fix it. Thanks.
Link updated, the last one didn’t work correctly. Try now
Did everything indicator not showing among list of indicators.
Pls whats the problem.
How to install indicators , I’ll try through out as a step, it does not work, kindly please upload a guided video
I think the signal repaints…if price retrace back above the recent high/low after which signal given
Have you tested it and it repaint? I am trying to do that but nothing yet
Yes tested
It doesn’t repaint
So far working like a charm, no repaint noticed so far. Scanner is incredible and the signals very good you just need to be patient. I’m running it on h1
running it on M1, you will see the signals change.when the price come to a new high,it will disappear when you open a new chart
Can you guide me on how to run it?
Unfortunately, repaint itself 😌😌
Check original website and see where to place stop loss. Use positive risk reward and voila, profit
The indicator repaint. NOT RELIABLE AT ALL
Idiot pointer
The indicator has a price of 420 dollars on the main site and it usually draws the same, so why is this exaggerated price the indicator gives you a rise message and when the market is falling it removes the ascending message
working just fine checked nov-dec 2020 in a forex simulator the core100 is a repainter but histogram and the ea scanner can be used profitably with little bit of more filter i am using it with my own system will tell how it worked
Could you please share extra filter? I am sure it repaints,I have tested it. but initially couple of days it looked promising. Could you please share your filter indicators?
The antivirus avira deleted all my mt4 because of this file – now I have downloaded everything again – is there a way to use indicators without this file ??
I have confirmed about repainting the signals. It clearly states on the website that ” CORE100 indicator recaculates entries only and when the Actificial intelligence of the indicator is breached by trend. It provides new signal for the pair.Only 5 out of 100 signals repaints. The indicator has been built to subdue fake signal with over 95% accuracy on every signal. With a win rate of 9:10″. So though it has repainted its not often at all and I have ran this through my simulator which mimics a live environment and its legit!
Can you share your setup / strategy? Would love to see it
Even when a signal did disappear i still went into major profit
The folder is empty. FxCore100>MQL4>Expert – empty folder
Hi admin, do you have the latest version for this, the version of this indicator is v1.2 apparently the latest version is v2,
Dll file is password protected whats the password?
hello i want say the update for this indiccator is relase in this site???
whats the new password??????
Can anyone help me with the scanner
I copied the file to expert folder and attach to a chat but it doesn’t scanner, i also ran the template but it shows old info, it doesn’t update.
How do i get it to work? Please help.
Thank you.
Is it password Protexted? I am not able to open the dll file.
ADMIN did not put how to set up
forexcracked dot com is not the password. What is the new password?
‘Price Action Diver Power’ non repaint Indicator looks extremely profitable in YouTube livetrade by developer. Hopefully we can have a cracked version here. Have a look yourselves.
If the scanner is on H1 chart, will it show me the signals of the other pairs also on H1?
how do I receive entry notifications over the phone
Is there any update for indicator ?
According to Defender the file msimg32.dll is a Trojan Trojan:Win32/Skeeyah
Hello,
You don’t show where to add the scanner.
There are 3 files on the MQL4
1. Experts ( Inside there is: fxcorescanner .ex4 file)
2. Indicators: ( Inside there is: FX-CORE100 HISTO AND FC-CORE100 .ex4files)
3. Template: (inside there is: Fx core 100 indicator + scanner.tpl and fxcore 100 only indicators.tpl)
Please, I am installing indicators for the first time.
which file will Installed and where
Are the Arrows are non repaint? btw thanks admin you are the best
what are the best settings for the indicator ?
Hi All
I have loaded all but the RSI is not working
Do I have to set “Allow DLL Imports” on all indicators
This is the best indicator I’ve ever seen!!!! BUT the .dll file is a virus… Please guys, fix it so that we can use it